GPS Receiver for Aadhar FX100
PRODUCT TECHNICAL SPECIFICATIONS:
| Electrical Characteristics (Receiver) | |
| GPS Chipset | Mideateck |
| Frequency | L1, 1575.42 MHz |
| Channels | 22 (Tracking) / 66 (Acquisition) |
| Sensitivity | Acquisition Ͳ148dBm & Tracking Ͳ165dBm |
| Accuracy | |
| Position Horizontal | <2.5m 2D RMS SBAS Enable |
| Velocity | 0.1m/sec 95% (SA off) |
| Time | 10 ns 1PPS out |
| WAAS | Enabled for North America products |
| Acquisition Rate | |
| Hot start | <1s TTFF@Ͳ130dBm with EASY™ and TTFF@Ͳ130dBm without EASY™ |
| Warm start | <5 sec TTFF@Ͳ130dBm with EASY™ and <30s TTFF@Ͳ 130dBm without EASY™ |
| Cold start | <15 sec TTFF@Ͳ130dBm with EASY™ and <35s TTFF@Ͳ130dBm without EASY™ |
| Reacquisition | 0.1 sec. average (interruption recovery time) |
| Protocol | |
| GPS Protocol | Default: NMEA 0183 (Secondary: SiRF binary) PMTK SiRF binary >> position, velocity, altitude, status and control NMEA 0183 MEA0183 V3.0 protocol, and supports command: GGA, GSA, GSV, RMC, VTG, GLL DGPS, SBAS(WAAS/EGNOS/MSAS/GAGAN)Software command setting (Default : 4800,n,8,1for NMEA ) |
| GPS Output Data | |
| GPS Transfer rate | |
| Dynamic Condition | |
| Acceleration Limit | Less than 4g |
| Altitude Limit | 18,000 meters (60,000 feet) max. |
| Velocity Limit | 515 meters/sec. (1,000 knots) max. |
| Jerk Limit | 20 m/sec**3 |
| Temperature | |
| Operating | Ͳ40°~ 80°C |
| Storage | Ͳ40°~ 85°C |
| Humidity | Up to 95% nonͲcondensing |
| Power | |
| Voltage | 5V ±5% |
| Current | 60mA typical |
| Physical Characteristics | |
| Dimension | (97mm x 65mm x 30mm) |
| USB Cable Length | 60" (150 cm) |
| Low Noise Amp | |
| Amplifier Gain w/out cable | 27 dB Typical |
| Filtering | Ͳ25dB (+100 MHz) |
| Output VSWR | 2.0 Max |
| Voltage | DC 3 ~ 5.0V |
| Current | 15mA max @ 5VDC |
